• |
  • |
  • |
D d D1 d1 H G1 G C
32 22 30.5 28.5 16.4 6.35 16.4 4
40 24 38.7 35.4 18.4 6.4 18.4 4
40 26 39 36 15.5 2.6 15.5 4
40 30 38.5 35.4 16.4 6.35 16.4 4
45 31 44 41 15.5 2.6 15.5 4
50 34 48.7 45.4 18.4 6.4 18.4 4
50 34 49 46 20.5 3.1 20.5 4
55 39 53.65 50.37 18.4 6.35 18.4 4
55 39 54 51 20.5 3.1 20.5 4
60 44 58.7 55.4 18.4 6.4 18.4 4
60 44 59 56 20.5 3.1 20.5 4
63 47 61.7 58.4 18.4 6.4 18.4 4
63 47 61.7 58.4 19.4 6.4 19.4 4
63 47 62 59 20.5 3.1 20.5 4
65 49 64 61 20.5 3.1 20.5 4
65 50 63.64 60.41 18.4 6.35 18.4 4
70 50 68.3 64.2 22.4 6.4 22.4 4
70 54 69 66 20.5 3.1 20.5 4
75 55 73.3 69.2 22.4 6.4 22.4 4
75 59 74 71 20.5 3.1 20.5 4
80 60 78.3 74.2 22.4 6.4 22.4 5
80 62 79 76 22.5 3.6 22.5 5
85 65 83.34 79.16 22.4 6.35 22.4 5
85 65 83.34 79.16 22.4 6.35 22.4 5
85 65 93.3 79.2 22.5 6.4 22.4 5
90 70 88.3 84.2 22.4 6.4 22.4 5
90 72 89 86 22.5 3.6 22.5 5
95 75 93.31 89.15 22.4 6.35 22.4 5
100 75 98 93.2 22.4 6.4 22.4 5
100 82 99 96 22.5 3.6 22.5 5
105 80 103 98.1 22.5 6.4 22.5 5
110 85 108 103.2 22.4 6.4 22.4 5
110 92 109 106 22.5 3.6 22.5 5
120 95 118 113.1 22.4 6.4 22.4 6
125 100 123 118.1 25.4 6.4 25.4 6
125 103 124 121 26.5 5.1 26.5 6
135 110 132.5 127.6 25.4 9.5 25.4 6
140 115 138 133 25.4 6.4 25.4 6
140 118 139 136 26.5 5.1 26.5 6
150 128 149 146 26.5 5.1 26.5 6
160 130 158 153 25.4 6.4 25.4 6
160 138 159 156 26.5 5.1 26.5 6
165 143 164 161 26.5 5.1 26.5 6
180 155 177.5 171.7 25.4 12.75 25.4 6
180 158 179 176 26.5 5.1 26.5 6
185 160 182.5 176.7 25.4 12.75 25.4 6
200 175 199 196 31.5 6.6 31.5 6

Technical Specifications

Advantages

 

  • The NS-37 Piston Seal L 43 is used for sealing pistons with pressure on both sides 
  • The angled rings guide the piston on the cylinder bore
  • No extrusion into the radial sealing gap
  • Suitable for rapid pressure change
  • Sealing component protected against twisting

       

Technical Data

 

Operating Conditions

Pressure                 :  400 bar

Temperature         :  -35°C ~ + 100°C

Sliding Speed        :  ≤ 0.5 m/s

Media                    :  Hydraulic oils (Mineral oil-based)   

 

Material

Material                 :  PU/NBR+POM

Hardness               :  80-85 Shore A

Energizer               :  NBR/FKM (FKM Energizer should be used when temperature is over 100 °C)

Color                      :  Novelty Blue

Products