Novelty Impex

D	d	G	O RING	X RING	C
16	5	4.2	4.34X3.53	12.42X1.78	4
22	11	4.2	10.69X3.53	17.17X1.78	4
25	14	4.2	13.87X3.53	20.35X1.78	4
28	17	4.2	15.47X3.53	23.52X1.78	4
30	19	4.2	18.66X3.53	25.12X1.78	4
32	21	4.2	20.22X3.53	26.70X1.78	4
35	24	4.2	23.40X3.53	29.87X1.78	4
40	29	4.2	28.17X3.53	34.65X1.78	4
42	31	4.2	29.75X3.53	37.82X1.78	4
45	34	4.2	32.92X3.53	37.82X1.78	4
50	39	4.2	37.69X3.53	44.17X1.78	5
50	34.5	6.3	32.69 x 5.33	44.17 x 1.78	5
52	41	4.2	40.87X3.53	47.35X1.78	5
55	44	4.2	44.04.X3.5	50.52X1.78	5
60	49	4.2	47.22X3.53	53.70X1.78	5
63	52	4.2	50.39X3.53	56.87X1.78	5
63	47.5	6.3	47 x 5.33	56.87 x 1.78	5
65	54	4.2	53.57X3.53	60.05X1.78	5
70	59	4.2	56.74X3.53	63.22X1.78	5
70	54.5	6.3	53.34 x 5.33	63.22 x 1.78	5
75	64	4.2	63.09X3.53	69.57X1.78	5
80	64.5	6.3	62.87X5.33	72.75X1.78	5
80	59	8.1	58 x 6.99	71.12 x 2.6	5
85	69.5	6.3	69.22X5.33	75.92X1.78	5
90	74.5	6.3	72.39X5.33	82.27X1.78	5
95	79.5	6.3	78.74X5.33	88.62X1.78	5
100	84.5	6.3	81.92X5.33	88.62X1.78	6
100	79	8.1	77 x 6.99	88.57 x 2.6	6
105	89.5	6.3	88.27X5.33	94.97X1.78	6
110	94.5	6.3	91.44X5.33	101.32X1.7	6
115	99.5	6.3	97.79X5.33	107.67X1.7	6
120	104.5	6.3	100.97X5.3	114.02X1.7	6
125	109.5	6.3	107.32X5.3	114.02X1.7	6
130	114.5	6.3	113.67X5.3	120.37X1.7	6
135	114	8.1	113.67X6.9	126.67X2.6	6
140	119	8.1	116.84X6.9	126.67X2.6	6
150	129	8.1	126.37X6.9	139.37X2.6	6
160	139	8.1	135.89X6.9	145.72X2.6	7
170	149	8.1	145.42X6.9	158.42X2.6	7
180	159	8.1	158.12X6.9	171.11X2.6	7
190	169	8.1	164.47X6.9	177.47X2.6	7
200	179	8.1	177.17X6.9	190.17X2.6	7
210	189	8.1	183.52X6.9	196.52X2.6	8
220	199	8.1	196.22X6.9	202.87X2.6	8
240	219	8.1	215.27X6.9	221.92X2.6	8
250	229	8.1	227.97X6.9	234.62X2.6	8
250	225.5	8.1	221.62 x 6.9	234.62 x 2.6	8
310	282	9.5	279 x 8.4	291.69 x 3.6	9
350	322	9.5	319.5 x 8.4	329.8 x 3.6	9

Technical Specifications

Advantages

Wide range of temperature and chemicals depending on the o-ring and x-ring material
Low friction, free of stick-slip
High sealing effect in applications requiring media separation
Low gas permeation rate
Minimum static and dynamic friction coefficient for a minimum energy loss and operating temperature
Simple groove design and low axial housing heights

Technical Data

Operating Conditions

Pressure : 400 bar

Temperature : -35°C ~ + 100°C

Sliding Speed : ≤ 2.0 m/s

Media : Hydraulic oils (Mineral oil-based)

Material

Material : NBR + PTFE-Bronze/ Carbon/ Graphite/ MoS2

Hardness : 70 Shore A

O - Ring : NBR/FKM (FKM O-Ring should be used when temperature is over 100 °C)